Using the Library Information Resource Network (LIRN), JSTOR, or any other electronic journal
database, research eight (8) peer-reviewed articles that can be used to answer below assignment. Your discussion should summarize the articles in such a way that it can justify
any arguments you may present in below assignment and should be different from the
abstract. In addition to your researched peer-reviewed article, you must include an example of
the article researched as it is applied by industry (company, business entity, and so forth).
During the next four months, a customer requires, respectively, 500, 650, 1000, and 700 units
of a commodity, and no backlogging is allowed (that is, the customer’s requirements must be
met on time). Production costs are $50, $80, $40, and $70 per unit during these months. The
storage cost from one month to the next is $20 per unit (assessed on ending inventory). It is
estimated that each unit on hand at the end of Month 4 can be sold for $60. Assume there is no
● Determine how to minimize the net cost incurred in meeting the demands for the next
● Use SolverTable to see what happens to the decision variables and the total cost when
the initial inventory varies from 0 to 1000 in 100-unit increments.
● How much lower would the total cost be if the company started with 100 units in
inventory, rather than none?
● Would this same cost decrease occur for every 100 -unit increase in initial inventory?
Running head: MATRIX OF COMMUNITY PARTNERING OPPORTUNITIES
DEVELOPMENT OF ENGINEERING LITERATURE REVIEW
Development of Engineering Literature Review
Development of Engineering Literature Review
Jang Y-J, Kim H-J, Kim H-G, Kang K-W. Identification of Deboning Damage at Spar Cap-Shear Web Joints by Artificial Neural Network Using Natural Frequency Relevant Key Features of Composite Wind Turbine Blades. Applied Sciences. 2021; 11(12):5327. https://doi.org/10.3390/app11125327
This article discusses the importance and how to ensure structural integrity according to blade spar. The blade consists of a higher and an underneath layer that receives load electricity directly. Loads produced during the engineering process through the wind turbines can cause damages to the spar cap shear wedge. The wind turbines manufacture energy by lifting and exhausting through moving air that is then generated into energy. The damaged part of the shear can be detected through inspection, ultrasound detection, machine vision, and vibration analysis, where the frequency of the structure is measured based on the hypothesis that indicates the natural frequency of a structural machine changes with stiffness leading to internal damage.
Beshay, M.E.G., &KARAM (2020) Structural Optimization of Wind Turbine Blades for Improved Dynamics Performances DOI: 10.5772/intechopen.91643
This article illustrates the whole optimization of wind turbines to ensure the development of engineering. The most fundamental step is to reduce the entire structural mass of the blade spar under frequency and strengths, then reduce the overall l vibration level by reducing a frequency or adding the natural frequency and inserting them at their target values to avoid unusual occurrences result in damage. Wind energy is among the most popular renewable energies produced by using larger and well-structured turbines. This structure stays fabricated to avoid break down during the rotation process. Thus causing damage to the structure due to stiffness.
Boudonuit, H., Tarfaoui, M., Saifaoui D., (2018)Structural Design and offshore wind turbine blade sparsDOI: 10.1177/0309524X211027812
This article illustrates the use of wind turbines and the modified design of spars. Spars are analyzed beneath loads and on vibration. Improvement of the structure is critical to make sure there is stiffness. Different analytical subroutines have been created for the evaluation of the structure.
Elsayed, E.K, ElDahshan, K.A, El-Sharawy, E.E, Ghannam N.E.,(2019). Reverse engineering approach for improving the quality of mobile applications. PeerJ Computer Science 5:e212 https://doi.org/10.7717/peerj-cs.212
The purpose of this paper is to describe the integrated approach to come up with measurements and data, for example, from turbine blades to build valid structures through the reverse method of engineering, paper it is applied in mobiles.
Cotacallapa-Sucapuca, M., Vega, E. N., Maieves, H. A., Berrios, J. J., Morales, P., Fernández-Ruiz, V., & Cámara, M. (2021). Extrusion Process as an Alternative to Improve Pulses Products Consumption. A Review. Foods (Basel, Switzerland), 10(5), 1096. https://doi.org/10.3390/foods10051096
This illustrate the extraction process, which is highly regarded in manufacturing industries, especially for products with maximum loading capacity. Extrusion is applied depending on the end product's shape and load quantity, Thus applied through comparison of these two approaches.
Jaehnke, M., Gensch, F., & Mueller, S. (2018). Modification of the anisotropy and strength differential effect of extruded AZ31 by extrusion-shear. DOI: 10.1063/1.5034851
This paper illustrates the modification of extrusion in engineering. It was drawing using tensile strength of material limits the number of changes that can be done. There are different types of extrusions due to diverse applications. These are hot, friction, and cold.
Chen, C., Wang, T., & Wang, L. (2021). Sensitivity Study of the Influence of Blade Sectional Stiffness Parameters on the Aeroelastic Response of Wind Turbines. Frontiers In Energy Research, 9. doi: 10.3389/fenrg.2021.707082
This paper illustrates the development of and influences of the blade for the performances of Ventron Engineering Company. This company has been able to use single blades due to their strong and heavy helicopter blade. Thereby the company has developed two options which are section and upgraded extrusion process.
We are a professional custom writing website. If you have searched a question and bumped into our website just know you are in the right place to get help in your coursework.
Yes. We have posted over our previous orders to display our experience. Since we have done this question before, we can also do it for you. To make sure we do it perfectly, please fill our Order Form. Filling the order form correctly will assist our team in referencing, specifications and future communication.
2. Fill in your paper’s requirements in the "PAPER INFORMATION" section and click “PRICE CALCULATION” at the bottom to calculate your order price.
3. Fill in your paper’s academic level, deadline and the required number of pages from the drop-down menus.
4. Click “FINAL STEP” to enter your registration details and get an account with us for record keeping and then, click on “PROCEED TO CHECKOUT” at the bottom of the page.
5. From there, the payment sections will show, follow the guided payment process and your order will be available for our writing team to work on it.
Need this assignment?
Order here and claim 25% off
Discount code SAVE25